NATES LOG Chapter 3

Looks great Nate.
I still say you should have....

i should have ????

Does it matter??

ahh 3 hour of work and this is what i got 2 clean rims man this takes forever i really need a sand blaster but i also took photos of what i have available to me to use and yes i have to knock the bearigns out of the hubs yet the PO had painted them too with some kind of enamel brush on pain oh boy what a mess Yellow dust everywhere and heres the pics i couldnt believe it i broke a sweat doing this takes alot of effort to push the whire wheels into where u want them and to hold the rim









hopefully the rears go faster as they are bigger and i can get the wheels into the spaces easyer wish me luck

Nice work Nate!! That thing is gonna look wicked with the front and rear AGs!

good lord man i just got done with the rears and im covered in yellow dust i need to go clean up the shop a bit yet tonite and then i might get them in primer tonite and yellow tomorrow

Good deal Nate.

oh yeah i found a JD grave yard 15 min away it sounds like i guess the guy is from WFM so parts parts parts and more parts it sounds like

sweet nate. We need to start a collection to get you a sandblaster

hey ill second that motion lol

Excellent. Well i have some sand you can have

Darn it Nathan, I still cant see your pics on this forum either. Its something to do with the security setting the company has on my computer. I can view photobucket though. oh well.

sorry ohmar u are going to have to borrow someones someday and check them out lol

good idea nate, that worked, I was able to view them on my crackberry, it took a while but they finally showed up
Thanks

i have seen my photos on a blacburry u lose alot in the size lol

oh boy another day done lol not much to report today but i did get the rims for the 100 in primer tomorrow inside paint then 2 days wait i also tried to do some more searching on the info for the 100 that i need man this is a pain if i could find someone to give me the numbers off of their original engine that would make it easyer im going to email the guys on ebay and see if they will but as for now that endevor is awaiting responses dad did drag home a good find he found some 1/4 inch plate 49 inches long and 30 wide there are four pieces should cost us about 50 bucks they are also grade 50 steel and now with the pics

Nathan Werneburg wrote:

i have seen my photos on a blacburry u lose alot in the size lol

Age does the same thing my friend, except to my gut

NOT bad for one day Nate, got more done than me but that aint to hard to do

So whats going to become of those plates of steel???

well we were thinking the loader bucket for the 210 and the hydralic tank for it also but thats subject to change oh and gussets for the lift arms

Sweet Nate. I hope i can come across some steel like that cheap for whenever i get around to building a FEL for the homemade.

hmmmm oh yeah todays progress

well i got the inside of the rims painted Friday i will mount the tires gives the paint some time to harden and i stripped out a wiring harness dad got from work lots of good switches from that stuff and i also reassembled the 15 hp briggs from that eagle star murrey mower had to replace the connecting rod and have the crank polished if yall dont remember but i think she will do just fine now i got the valves set corectly and thanks to someone over at mtf got the right sequecne to do this in lol it should work out nicely and i checked to make sure the compression relief is workin i might go grab that frame and bolt the engine onto it for a test run tomorrow as for now the pics oh and i only have a total of 60 dollars invested into that 15 hp



]

Nice touch with the add oil sign just rebuilt my buddies powerking and I got a call during the snow storm monday it blew up again went over tonight and it sure did took the engine off and heard the parts rattleing inside. I looked at him and asked if he put the oil in and he just looked away in disgust I think you know the rest of the story......

yeah u got to have them dum dum signs even for ur self this may or may not get started soon i havent decided yet

well not an eventfull day i did sell the Murrey self propelled today as some of u already know and i made a flyer going to go into small engine repair and service hope i can at least stay afloat doing that who knows may even turn into full time we will see what the future brings i went out back and cut the frame for that eagle star mower up and mounted the 15 hp engine to it then this evening i fiered that engine up runs good sounds good the elctric fuel cut off was stuck at first though a little tap and there we go all better lol but that was it for the day tomorrow might be a bit more event full so i made a total of forty bucks today not much but enough and now the pics this is my local flyer will post this at the bowling alley the gas stations and the local TSC or Bomgaars which is what ours is called here

Nice flyer Nate, I like the sign on the 15 HP