| case 190 project going strong continually updated | |
|
+5HorseFixer TJ johnboggs21 Nathan Werneburg tracktor312 9 posters |
|
Author | Message |
---|
tracktor312 Posted on by 1K
Posts : 1226 Join date : 2009-03-02 Age : 57 Location : MA
| Subject: case 190 project going strong continually updated Tue 03 Mar 2009, 12:17 am | |
| just picked this up looks ok runs great seems to slip alittle in hi gear (dirty oil and filter ) should be nice when done. drained rearend of all fluid cleaned case and filter looks good in there. Decided to strip and prime the fenders while apart .[img] [/img][img] [/img][flash] [/flash]
Last edited by tracktor312 on Wed 18 Mar 2009, 4:07 pm; edited 3 times in total | |
|
| |
Nathan Werneburg Post Addict
Posts : 441 Join date : 2009-02-24 Age : 43 Location : Ida Grove IA
| Subject: Re: case 190 project going strong continually updated Tue 03 Mar 2009, 12:49 am | |
| | |
|
| |
johnboggs21 Moderator
Posts : 1123 Join date : 2009-02-24 Age : 31 Location : michigan
| Subject: Re: case 190 project going strong continually updated Tue 03 Mar 2009, 7:06 am | |
| Fine peice of equipment you have there! Planning a total resto on it? | |
|
| |
tracktor312 Posted on by 1K
Posts : 1226 Join date : 2009-03-02 Age : 57 Location : MA
| Subject: Re: case 190 project going strong continually updated Tue 03 Mar 2009, 8:41 am | |
| Not a total restore I am just going to clean it up and paint it. the tractor is pretty solid it actually looks worse in pics because someone put primer on the rear fenders and it looks like rust. | |
|
| |
johnboggs21 Moderator
Posts : 1123 Join date : 2009-02-24 Age : 31 Location : michigan
| Subject: Re: case 190 project going strong continually updated Wed 04 Mar 2009, 6:06 pm | |
| Nice, whats it got for a motor?? | |
|
| |
TJ
Posts : 24 Join date : 2009-03-01 Age : 74 Location : Burlington, Michigan
| Subject: Re: case 190 project going strong continually updated Wed 04 Mar 2009, 6:11 pm | |
| Case makes a tough tractor. Looks staight and solid. | |
|
| |
tracktor312 Posted on by 1K
Posts : 1226 Join date : 2009-03-02 Age : 57 Location : MA
| Subject: Re: case 190 project going strong continually updated Wed 04 Mar 2009, 11:22 pm | |
| Thanks guys it has the original kohler K301 in it runs great haven't had time to do anymore to it been helping my buddy with his tractor. I will get some done this weekend I am sure. | |
|
| |
HorseFixer
Posts : 61 Join date : 2009-02-26 Age : 66 Location : Michigan ~ Wolverine Country
| Subject: Re: case 190 project going strong continually updated Fri 06 Mar 2009, 1:45 pm | |
| Looking good! | |
|
| |
tracktor312 Posted on by 1K
Posts : 1226 Join date : 2009-03-02 Age : 57 Location : MA
| Subject: Re: case 190 project going strong continually updated Sat 07 Mar 2009, 10:03 pm | |
| | |
|
| |
tracktor312 Posted on by 1K
Posts : 1226 Join date : 2009-03-02 Age : 57 Location : MA
| Subject: Re: case 190 project going strong continually updated Sat 07 Mar 2009, 10:41 pm | |
| [img] https://motomow.forumotion.com/[/img]also It was 59 degrees today so I took advantage of it to start my car for the first time today should be ready for some fun soon..... just lots of sanding and some color thinking of a charcoal grey it has red interior so choices are limited | |
|
| |
tracktor312 Posted on by 1K
Posts : 1226 Join date : 2009-03-02 Age : 57 Location : MA
| Subject: Re: case 190 project going strong continually updated Sun 08 Mar 2009, 6:06 pm | |
| | |
|
| |
tracktor312 Posted on by 1K
Posts : 1226 Join date : 2009-03-02 Age : 57 Location : MA
| Subject: Re: case 190 project going strong continually updated Sun 08 Mar 2009, 9:49 pm | |
| | |
|
| |
johnboggs21 Moderator
Posts : 1123 Join date : 2009-02-24 Age : 31 Location : michigan
| Subject: Re: case 190 project going strong continually updated Sun 08 Mar 2009, 9:53 pm | |
| Comin along nicely! Dont pull a buzz and drop a wrench in one of those oil buckets! jk buzz | |
|
| |
tracktor312 Posted on by 1K
Posts : 1226 Join date : 2009-03-02 Age : 57 Location : MA
| Subject: Re: case 190 project going strong continually updated Sun 08 Mar 2009, 10:01 pm | |
| HA like we all haven't done that 100 times | |
|
| |
Nathan Werneburg Post Addict
Posts : 441 Join date : 2009-02-24 Age : 43 Location : Ida Grove IA
| Subject: Re: case 190 project going strong continually updated Sun 08 Mar 2009, 11:06 pm | |
| well its getting there lookin good so far | |
|
| |
wvbuzzmaster Admin
Posts : 1026 Join date : 2009-02-24 Location : West Virginia
| Subject: Re: case 190 project going strong continually updated Mon 09 Mar 2009, 2:29 am | |
| The wrench slipped I tell you!! I had to hang the wrench underneath the tractor to let the oil drain off it... It was my brand new only used that day 8 inch adjustable wrench... After I was done I cleaned up and went for a ride. When something shot out from underneath the tractor I realized I had just located my missing wrench. | |
|
| |
tracktor312 Posted on by 1K
Posts : 1226 Join date : 2009-03-02 Age : 57 Location : MA
| Subject: Re: case 190 project going strong continually updated Mon 09 Mar 2009, 5:20 pm | |
| [img] https://motomow.forumotion.com/[/img]OH well pretty much a wasted day for tractor work we had snow and ice living on a hill has its downsides.... If you look real hard my neighbor across the street is a little over 600' away all down hill. yesterday I had a bare yard no snow at all. I quess there only 3-4" now but the ice is horrible. | |
|
| |
Nathan Werneburg Post Addict
Posts : 441 Join date : 2009-02-24 Age : 43 Location : Ida Grove IA
| Subject: Re: case 190 project going strong continually updated Mon 09 Mar 2009, 5:40 pm | |
| oh boy i see something i would never do lol leave my tractors out side i cant justify letting stuff that costs this much sit outside | |
|
| |
tracktor312 Posted on by 1K
Posts : 1226 Join date : 2009-03-02 Age : 57 Location : MA
| Subject: Re: case 190 project going strong continually updated Mon 09 Mar 2009, 5:51 pm | |
| Yeah its tough to keep them inside I have 18 tractors a golf cart even both my vettes are outside I think I would either have to get rid of most everything or build a big shop. I even have my wife parking outside (don't know how I got away with that one) I only have my tools and right now 2 tractors I am redoing the case 190 and the jim dandy in the garage. and LOTS of parts | |
|
| |
Nathan Werneburg Post Addict
Posts : 441 Join date : 2009-02-24 Age : 43 Location : Ida Grove IA
| Subject: Re: case 190 project going strong continually updated Mon 09 Mar 2009, 5:57 pm | |
| oh wow and we all know buildings aint cheap and they take a long time to build we are supposed to be undertaking a 20 by 40 one some time in the next few years i will believe it when i pour the concrete slab | |
|
| |
Motomow Admin
Posts : 1516 Join date : 2009-02-24 Location : Indiana
| Subject: Re: case 190 project going strong continually updated Fri 13 Mar 2009, 1:47 am | |
| - tracktor312 wrote:
- Yeah its tough to keep them inside I have 18 tractors a golf cart even both my vettes are outside I think I would either have to get rid of most everything or build a big shop. I even have my wife parking outside (don't know how I got away with that one) I only have my tools and right now 2 tractors I am redoing the case 190 and the jim dandy in the garage. and LOTS of parts
Awesome old case 312 I love those old big wheel ones. | |
|
| |
tracktor312 Posted on by 1K
Posts : 1226 Join date : 2009-03-02 Age : 57 Location : MA
| Subject: Re: case 190 project going strong continually updated Sun 15 Mar 2009, 12:25 am | |
| / / not a whole lot done today did manage to strip the dash and the steering wheel and column should have took pics of bare metal but forgot sorry | |
|
| |
Nathan Werneburg Post Addict
Posts : 441 Join date : 2009-02-24 Age : 43 Location : Ida Grove IA
| Subject: Re: case 190 project going strong continually updated Sun 15 Mar 2009, 12:41 am | |
| looking pretty good there man | |
|
| |
tracktor312 Posted on by 1K
Posts : 1226 Join date : 2009-03-02 Age : 57 Location : MA
| Subject: Re: case 190 project going strong continually updated Sun 15 Mar 2009, 4:54 pm | |
| [img]https://motomow.forumotion.com/[url=https://servimg.com/view/13630157/67] [/img] [/url] A little more done today stripped and painted the block. I will sandblast the tin and prime tonight.
Last edited by tracktor312 on Wed 18 Mar 2009, 8:28 pm; edited 1 time in total | |
|
| |
Nathan Werneburg Post Addict
Posts : 441 Join date : 2009-02-24 Age : 43 Location : Ida Grove IA
| Subject: Re: case 190 project going strong continually updated Sun 15 Mar 2009, 6:32 pm | |
| | |
|
| |
Sponsored content
| Subject: Re: case 190 project going strong continually updated | |
| |
|
| |
| case 190 project going strong continually updated | |
|