Well I got the old 4 horse briggs out today. I mounted up a fuel tank, and washed the motor off with gas. I made up a gasket for the crankcase too. Luckily the 16 horse will mount up in the same holes that the original 11 horse used. The motor will just BARELY fit without modifying the hood.

I think it might be safe to say the murray has more balls than most of KCs tractors now.





The damage:



Planning on JB welding the hell out of that.

sorry for the crappy pics. Took em with moms iphone

We need to see a few better pictures, mabey something with a few more pixels and higher resolution.

[quote="johnboggs21"]Well I got the old 4 horse briggs out today. I mounted up a fuel tank, and washed the motor off with gas. I made up a gasket for the crankcase too. Luckily the 16 horse will mount up in the same holes that the original 11 horse used. The motor will just BARELY fit without modifying the hood.

I think it might be safe to say the murray has more balls than most of KCs tractors now.

more balls than the Gilson LOL

it had more balls than the gilson witht he old motor

Progress:



A pic of the shop for KC:

Now I know why you couldn't quit hurting yourself.

thats a bright ass light aint it?

heck i thought my barn was a tight squeeze

Well I tore the carb off to clean it the other today. Man that thing was ripe.

Decided to wasnt worth it to try to make it work, it had that stupid fuel shutoff solenoid on it anyways. Sooo i got a brand new carb for 10 bucks today. Slapped her on there, wrapped my rope around the pulley, gave her a nice tug and.........................

























SHE LIVES!!!!!!

had to shut it down after about a minute tho. She's got quite a bark with no exhaust whatsoever lol

Its getting close now. I slapped a straight pipe exhaust on her to quiet it down a wee bit. Drove it around for a few minutes today. Got a starter mounted up, and JB welded that peice in today. All thats really left to do is run the wiring, hook up the governor, and slap the hood back into place and this project will be done.

Then mounting the plow up and fabbing a lift mechanism will be the new project.

Brought her home today. Unloaded it off the truck and tried spinnin it over with the starter and the motor was locked up, so i grabbed a pipe wrench and was able to turn it over with that. Couldnt get it to start with the starter, but it fired right up when i used a rope around the bottom pulley. Drove it down the driveway, and about halfway back the sorry no good sonofabitch decided to throw a rod!!!

Dont feel like tearin it apart to see what the damage is now...............
Probly could put a new rod in it and be ok, but who knows, the crank might be messed up.
I think im just gonna part it out and comb craigslist for a whole nother engine...........

Was lookin on CL just now and might have found a replacement:
http://saginaw.craigslist.org/grd/1462254659.html

Well I hope you got it All I see is a deleted ad..